Here is a scaffold safety inspection checklist based on the provided search results:
General Requirements
Scaffolds are designed, constructed, and loaded according to manufacturer’s specifications under the direction of a competent person
Scaffolds are erected on sound, rigid footing capable of supporting at least 4 times the maximum intended load without failure
All scaffold components are in good working condition without any damage
Scaffolds and components are not loaded beyond their maximum rated capacities
Access Requirements
Safe access like ladders, stairs, ramps or walkways is provided for platforms over 2 feet high
Ladders are positioned to prevent tipping and bottom rung is less than 24 inches above support surface Cross-braces are not used for access unless designed for that purpose
Fall Protection
Workers on scaffolds 4 feet or higher above lower level are protected by guardrails or personal fall arrest systems
Guardrails meet height requirements (38-45 inches for top rail, 20-30 inches for midrail)
Personal fall arrest systems are attached to a fixed, independent anchorage point
Use Requirements
Work surfaces are free from slip/trip hazards like tools, debris etc.
Makeshift devices or ladders are not used to increase working height Work is prohibited during storms, high winds unless properly protected
Safe clearance of at least 10 feet is maintained from overhead power lines
Falling Object Protection
Workers are protected by hardhat use
Toeboards are installed on exposed sides to prevent falling objects
Mesh screens/panels installed to contain potential falling materials Tag lines used to control hoisted loads near scaffolds
By following comprehensive Scaffold Safety Inspection checklist, workers can ensure the safe erection, use and dismantling of scaffolds on the jobsite.
Ensure your mobile phone is fully charged and has a good internet connection. You might need to take photos or videos, so make sure there’s enough storage space available.
Use your mobile phone to document the scaffold setup before the inspection begins. Take wide-angle photos and close-up shots of critical areas, such as the base, connections, platforms, guardrails, and access points.
Checklist
Create or use existing scaffold safety inspection checklist on eAuditor Audits & Inspections. This checklist should cover all safety aspects, including structural stability, proper assembly, fall protection, and signage.
Real-time Reporting
If you encounter any safety issues during the inspection, use eAuditor Audits & Inspections to report them immediately. You can send emails to notify the relevant individuals or departments about the concerns.
Post-inspection Documentation
After completing the inspection, use eAuditor Audits & Inspections to compile all documentation, including photos, videos, checklist results, and any reports or communications. This digital record can be easily shared with stakeholders and archived for future reference.
By leveraging the capabilities of eAuditor Audits & Inspections, you can conduct scaffold safety inspection more efficiently and effectively, helping to ensure a safer work environment for everyone involved.
Pre-Startup Safety Review(PSSR) Checklist A Pre-Startup Safety Review(PSSR) checklist is a critical process to ensure that all safety measures, operational procedures, and […]
Pump Commissioning Checklist Creating a pump commissioning checklist using eAuditor Audits & Inspections can help ensure that all necessary steps are taken […]
Guardrail Inspection Checklist Creating a Guardrail Inspection Checklist for use with eAuditor Audits & Inspections involves identifying key elements related to the safety, […]