InterNACHI Home Inspection Report Checklist

Creating an InterNACHI Home Inspection Report Checklist using eAuditor Audits & Inspections can significantly enhance the efficiency and accuracy of your home inspections. InterNACHI (International Association of Certified Home Inspectors) provides a comprehensive list of inspection standards that you can customize into an eAuditor Audits & Inspections checklist. This process will help streamline data collection, generate reports, and ensure that all important areas are covered during the inspection.

Steps to Create an InterNACHI Home Inspection Report Checklist in eAuditor Audits & Inspections

1. Define the Inspection Categories

Based on InterNACHI’s Standards of Practice, your checklist should cover all major components of a home inspection. These categories typically include:

• Roofing
• Exterior
• Interior
• Structural Components
• Electrical Systems
• Plumbing Systems
• Heating, Ventilation, and Air Conditioning (HVAC)
• Insulation and Ventilation
• Fireplaces and Chimneys
• Attic, Basement, and Crawlspaces

You can organize these categories as sections in your eAuditor Audits & Inspections checklist.

2. Create a Checklist in eAuditor Audits & Inspections

You can manually create the checklist in eAuditor Audits & Inspections by adding each category as a section and including relevant items to inspect for each section. Here is an example for key categories:

Roofing

• Inspect shingles for damage or wear.
• Check for signs of leaks or water penetration.
• Inspect gutters and downspouts for proper drainage.
• Evaluate chimney flashing.
• Check roof ventilation.

Exterior

• Inspect siding for cracks, rot, or damage.
• Check doors and windows for proper sealing and operation.
• Inspect foundation for cracks or settlement.
• Examine decks, porches, and balconies for stability and safety.
• Assess driveways and walkways for cracks or trip hazards.

Interior

• Inspect floors, walls, and ceilings for structural issues or signs of water damage.
• Check windows and doors for functionality and drafts.
• Inspect stairways, handrails, and guardrails for safety.
• Test smoke and carbon monoxide detectors.

Electrical Systems

• Inspect electrical panels and breakers.
• Test GFCI outlets in bathrooms, kitchens, and exterior areas.
• Check for exposed wiring or improper installations.
• Verify the grounding and bonding of electrical systems.

Plumbing Systems

• Inspect visible pipes for leaks or corrosion.
• Test water pressure and functionality of faucets and toilets.
• Check water heater for leaks, rust, and proper operation.
• Inspect drainage and vent systems.

HVAC Systems

• Test heating and cooling systems for proper operation.
• Check air filters and ductwork for cleanliness and functionality.
• Inspect furnaces, heat pumps, and condensers for wear.
• Verify thermostat operation.

Attic, Basement, and Crawlspaces

• Check for signs of moisture, mold, or pests.
• Inspect insulation and ventilation.
• Look for structural integrity issues, like cracks in beams or joists.
• Assess the condition of attic access points and crawlspace openings.

3. Add Inspection Items

Within each category, you can list specific items to inspect, allowing for a Yes/No or Pass/Fail assessment, notes, and media attachments (photos or videos) for each item. This allows you to:

• Record specific observations.
• Attach visual evidence (photos).
• Add notes or comments for clarification.

For example:

• Roofing > “Shingles condition”: Pass/Fail, attach a photo, add a note if needed.
• Plumbing > “Water pressure”: Record findings, Pass/Fail, add notes for recommendations.

4. Incorporate Ratings and Recommendations

For each inspection item, you can include a field for providing recommendations or follow-up actions. For example, if you find an issue with the roof shingles, you can add:

• Issue: Shingles showing signs of wear.
• Recommendation: Recommend replacement of shingles within 1 year to avoid leaks.

5. Generate Reports

After completing the inspection, you can use eAuditor Audits & Inspections to automatically generate a detailed report. The report can include:

• A summary of findings.
• Photos of areas of concern.
• Recommendations for repairs or improvements.
• A rating system (Good, Fair, Poor, etc.) for each major component of the inspection.

6. Schedule Follow-up Inspections

eAuditor Audits & Inspections allows you to schedule follow-up inspections and track the completion of recommended repairs. This ensures homeowners or contractors follow through on fixing any identified issues.

7. Export and Share

Once the inspection is complete, you can export the report in various formats (PDF, Word, etc.) and share it with the client. eAuditor Audits & Inspection’s cloud-based system also makes it easy to store and access reports online.

Sample Sections for Your InterNACHI Home Inspection Report Checklist in eAuditor Audits & Inspections

With this structure, your eAuditor Audits & Inspections InterNACHI Home Inspection Report checklist will ensure that you cover all essential components outlined in the InterNACHI standards, document findings efficiently, and generate professional reports for clients.